2nd WORKSHOP: ADVANCED ENGINEERING METHODS FOR EVALUATION OF CRITICAL EQUIPMENT AND PIPING SYSTEMS

Thursday, November 26th, 2015, Hotel Vía Castellana (Madrid)

Overview

The seminar shall be focused on the problematic, methodologies, novelties, and benefits associated to the evaluation and upgrade of critical equipment and piping systems in refineries, petrochemical and power plants by applying integrated engineering methodologies and the intensive use of advance analysis and simulation tools.

We will share with the attendants our experience over 12 years of experience and more than 1,000 projects carried out.

Content

By dissecting real study cases, it shall be shown both the casuistry and scope of application of the methodology described, as well as the benefits derived from it, technical and economical, on:

(1)  Design Stage: in order to attain more reliable, optimized designs. Also for those designs for which regular design codes are not of application.

(2) Operation Stage: for evaluating performance improvements, foreseeing in-service failures, and improving the efficiency and availability of equipment/process. .

(3) Re-rating: Validation of the design and evaluation of the impact on the remaining life of equipment/piping due to the redefinition of operating conditions or new process requirements

(4) Evaluation of in-service failure causes or definition of preventive/corrective measures. Fitness for Service-Integrity

Agenda

10:00 Check-In. Introduction
10:10 Part I. PIPING

Study Case: Determination of Stress Intensity Factor and Flexibility Factor on modified piping components, and subsequent integration on Piping Flexibility Analysis

Study Case: Piping Creep Analysis –> methodology based on FFS API-579 (Fitness For Service

11:00 COFFEE BREAK
11:20 Part II. PÌPING & EQUIPMENT

Study Case: Analysis of dissimilar welding on great thickness pieces. Method for prediction of appearance of cracks..

Study Case: Evaluation of metallic joints (bellows) on piping systems. Characterization of the set by means of FEA. Prediction of failure for fatigue and/or plastic collapse

13:10 Part III. INTRO TO MANGEMENT OF ASSETS INTEGRITY
13:30 Colloquium
14:15 Lunch & Closure

If you are interested in attending, write an email to workshop@cadesoluciones.com

CADE participates in Pollutec Lyon 2025

Innovation and Waste: Hydrothermal Gasification Consolidates in Europe CADE will take part in the conference “Innovation & déchets – Le marché de la gazéification hydrothermale se développe via les fabricants français et européens”, organized by Biogaz Vallée®. During the session, international experts will present the advances of one of the

Leer más »

CADE awarded the Thermal Energy Storage Pilot Plant for the CIIAE

We are pleased to announce that CADE Soluciones de Ingeniería has been awarded the contract for the supply, installation, and commissioning of the Thermal Energy Storage Pilot Plant for the Iberian Centre for Research in Energy Storage (CIIAE). This initiative is part of Spain’s Recovery, Transformation and Resilience Plan (PRTR),

Leer más »

Grid Flexibility in the Energy Transition: The Role of Thermal Storage

Energy Transition and New Demands on the Power System The energy transition toward a decarbonized, highly distributed, and digitalized system requires a deep reconfiguration of the traditional electricity system. Furthermore, the massive integration of renewable energy sources with high variability and uncertainty complicates the operational stability of the power grid.

Leer más »

Stress Analysis in FRP/GRP Piping According to ISO 14692 Standard

Fiber Reinforced Plastic (FRP/GRP) piping is widely used in industries such as oil & gas, water, and chemicals due to its corrosion resistance and reduced weight. However, its design and installation require precise stress analysis to ensure the structural and operational integrity of the system. The ISO 14692 standard provides

Leer más »

Albacete

Parque Científico y Tecnológico

Paseo de la Innovación 3, 02006 Albacete – España

Tel. +34 967 19 01 72

Madrid

C/Raimundo Fernández Villaverde, 53 (Entreplanta)

28020

Madrid – España

Albacete

Parque Científico y Tecnológico

Paseo de la Innovación 3, 02006 Albacete – España

Tel. +34 967 19 01 72

Madrid

C/Raimundo Fernández Villaverde, 53 (Entreplanta)

28020

Madrid – España

Contact us

I guess you are interested in what we do

If you please, contact us and tell us about your project to inform you what we can do for you

Can we call you?

We inform you about our engineering solutions