CADE normally uses the Finite Element Method (FEM) to undertake simulation modelling and analysis of complex structural elements. This method is often used to analyse critical elements and mechanical parts, whose performance may be conditioned by other mechanical elements or systems.
In the structural analysis of railway rolling stock, specifically in frame structures of vehicles, the consideration of suspension systems (bogies) in its Finite Element Analysis becomes highly relevant: it allows to characterise (in the most realistic way possible) the bogie rigidity transmitted to the frame structure, according to the requirements of the standard “UNE-EN 12663 (2014) Structural requirements of railway vehicle bodies”.
The difference between the consideration or not consideration of the suspension system in the finite element analysis can be easily quantified. The results can be compared by analyzing the simulation of a multi-axle railway frame, applying the finite element method and using ANSYS software. For this purpose, two calculation models must be compared:
Stress distribution in both calculation models analysed (with the consideration of the suspension system and without it).
When validating this type of frame, the stress results might be the most relevant indicators. Therefore, not to incorporate the suspension systems in finite element analysis could be a too conservative assumption, from the structural integrity point of view, and unnecessarily increase material and manufacture costs.
In conclusion, by implementing suspension systems in railway frame validation, CADE is able to:
A bogie (also called railroad track or wheel truck) is the suspension system placed underneath a railway vehicle.
It has a primary suspension (which transmits efforts between the wheels and the bogie) and a secondary suspension (which transmits efforts between the bogie and the frame of the railway vehicle). Both suspensions have a series of springs and shock absorbers that allow to transmit efforts between the wheels, the bogie and the railway frame.
FATIGUE ANALYSIS OF PROCESS EQUIPMENT USING FINITE ELEMENT METHOD OBJECTIVE A significant supplier of process equipment and pressure vessels requested CADE’s services to perform design validation for fatigue of a
Structural Analysis of Railway Rolling Stock Incorporating Suspension System Advantages of incorporating the suspension system to finite element analysis CADE normally uses the Finite Element Method (FEM) to undertake simulation
Stress Intensity Factor (SIF) For Special Geometries in Piping Stress Analyisis SIF according to ASME B31J for special geometries not covered in ASME B31.1 and ASME B31.3 codes PROBLEM DEFINITION
Root Cause Analysis And Corrective Measures Of Dissimilar Weld Joint Failure In A High Pressure Steam Pipe PROBLEM DEFINITION During the operation of a petrochemical plant (located in Middle East),
Albacete
Parque Científico y Tecnológico
Paseo de la Innovación 3, 02006 Albacete – España
Tel. +34 967 19 01 72
C/Raimundo Fernández Villaverde, 53 (Entreplanta)
28020
Madrid – España
Albacete
Parque Científico y Tecnológico
Paseo de la Innovación 3, 02006 Albacete – España
Tel. +34 967 19 01 72
C/Raimundo Fernández Villaverde, 53 (Entreplanta)
28020
Madrid – España
If you please, contact us and tell us about your project to inform you what we can do for you
We inform you about our engineering solutions