Heat Exchanger Equipment Technology

One-source technology, engineering and detail design partner

Heat Transfer Equipment Technology

Simulation Engineering

Structural Engineering

Plant Engineering Services

Engineering Analysis

Process & Mechanical Consulting

3d laser scanner (scan to BIM) - escáner láser

3D Laser Scaner

robot arm (robótica colaborativa)

Collaborative Robots

CADE delivers full design and engineering services for heat transfer and process equipment and other units in oil&power industries by playing a role of technology and engineering partner for manufacturing companies, EPC contractors and plant owners.

CADE goes along with manufacturing and plant owner companies by providing in-depth expertise and technical support along both bidding and construction stages.

Heat Exchanger / Heat Transfer Equipment Waste Heat Boiler Manufacturing. Courtesy of GRIRO
Waste Heat Boiler Manufacturing. Courtesy of GRIRO
Heat Transfer Equipment Engineering Technology Courtesy of MAIVISA
Courtesy of MAIVISA

Engineering and design services range from process, thermal, hydraulic and detailed mechanical design, to procurement, commissioning and process performance advisory:

  • Thermal&Hydraulic design and plant process integration
  • CFD simulation of heat transfer and flows performance.
  • Mechanical design
  • CHT studies (Conjugated Heat Transfer)
  • FEM advanced analysis
  • Detail engineering. Manufacturing drawings
  • Advisory around underperformance, heat losses, performance reduction and Troubleshooting of existing equipment

Heat exchanger equipment

Direct Fired Heaters – Furnaces – Boilers (API560/ASME I/ASME IV) for monophasic/multiphasic processes:

HTF boilers, superheated water boilers, water bath boilers, crude heaters, refinery furnaces (convective+radiant sections), vis-breakers, saturated steam firetubed boilers, saturated steam watertubed boilers, fluidized bed combustion boilers

Shell and tube heat exchangers (TEMA/API 660) for monophasic/multiphasic processes:

Gas coolers, water coolers, compressor inter-coolers, recuperators, superheaters, reheaters, economizers, evaporators, condensers, LP-HP feedwater heaters, etc.

Air Cooled Heat Exchanger (API 661) forced or induced draft for monophasic/multiphasic processes:

Gas coolers, water coolers, oil-coolers, condensers, etc.

Cross-flow heat exchangers (finned tubes and cross-flow gas) for monophasic/multiphasic processes:

Recuperators/economizers, air preheaters, multi-effect evaporators, condensers, etc.

Direct contact heat exchangers for monophasic/multiphasic processes:

Deareators, degassers, cooling towers, exhaust gas heat recuperator (packed bed condenser), evaporative condensers, etc.

Cooling and heating of vessels/tanks (internal/external):

Jacketed vessels, suction heaters for viscous fluids, coils (agitation/non agitation).

Flue-Gas-Scrubber-Courtesy-of-GUNAK
Flue Gas Scrubber. Courtesy of GÜNAK

Process equipment (mass transfer as main feature)

Separators

  • Gas (steam) vs. liquid 1 vs. Liquid 2 (immiscibles): three phase separator gas-water-crude
  • Gas vs. solid: gravity separation, cyclones, bag filters, wet scrubbers, etc.
  • Gas vs. liquid: gravity separation, coalescers, demister pads, etc.
  • Liquid vs. solid: (thickeners, clarifiers, centrifuges (hydrocyclones), plate filters, etc.
  • Liquid vs. liquid (immiscible fluids): gravity separation (decanters), coalescers, etc.
  • Solid vs. Solid (gravity separation (decanters), coalescers, etc.

Separators (multi-component)

  • Distillation columns (random packed, structured packed, plates). Design of reboilers and condensers)
  • Absortion/Stripping columns (random packed, structured packed)

Dryers

  • Conduction, convection (spray dryers, trommel, fluidized bed, flash), radiation

Other Process technologies

CADE delivers full engineering and proprietary design of process units and plants including detailed design of main equipment around the following technologies.

Technology for Aqueous solutions treatment

  • Removal of NH3, H2S, VOCs, CO2, Alcohols, MTBE

Technology for Treatment of Gas-Phase streams

  • Adsortion Drying of gas streams with organic and inorganic components
  • Absortion of H2S, CO2, NH3, etc. in refinery gases.
  • Adsortion of HCl in refinery gases.
  • Removal of solid particles by means of cyclones, scrubbers, venturi washers, etc.

Contact with CADE, engineering experts

Seeking engineering and consulting services? Tell us about your project on the following form and one of our specialists will reach out to you as soon as possible.


Also, you can call +34 967 19 01 72 or send an email to cade@cadesoluciones.com.

Offices Albacete

Parque Científico y Tecnológico
Paseo de la Innovación 3,
02006 Albacete – Spain
Tel. +34 967 19 01 72

The FACTORY caDE

Av. Adeca, 55, 02007 Albacete - Spain

Offices MADRID

C/Raimundo Fernández Villaverde, 53 (Entreplanta), 28020 – Madrid

CADE SOLUCIONES

legal notice​

© Copyright 2003-2025 | Cade Soluciones de Ingeniería S.L.

Albacete

Parque Científico y Tecnológico

Paseo de la Innovación 3, 02006 Albacete – España

Tel. +34 967 19 01 72

Madrid

C/Raimundo Fernández Villaverde, 53 (Entreplanta)

28020

Madrid – España

Albacete

Parque Científico y Tecnológico

Paseo de la Innovación 3, 02006 Albacete – España

Tel. +34 967 19 01 72

Madrid

C/Raimundo Fernández Villaverde, 53 (Entreplanta)

28020

Madrid – España

Cargar más

Contact us

I guess you are interested in what we do

If you please, contact us and tell us about your project to inform you what we can do for you

Can we call you?

We inform you about our engineering solutions

Privacy Summary

This website uses cookies so that we can offer you the best possible user experience. Cookie information is stored in your browser and performs functions such as recognizing you when you return to our website or helping our team understand which sections of the website you find most interesting and useful.